← All articles
Natart Como Classic vs Tall-Headboard Cribs: Footprint, Conversion and Panel Choice

Natart Como Classic vs Tall-Headboard Cribs: Footprint, Conversion and Panel Choice

Choose the Natart Como Classic when you want the lower, open island-crib form and only need a toddler-bed/daybed path. Choose one of the tall 4-in-1 Como cribs when a 52-inch headboard and a future 54-inch bed are part of the plan. Between the two tall versions, horizontal molding keeps the headboard wood; the geometric version adds a buttonless Boucle Beige upholstered panel.

The floor footprints are almost the same. Natart lists Como Classic at 55 x 30 x 34.5 inches, while both tall-headboard cribs are 55.25 x 30 x 52 inches. The real decision is therefore not “which crib fits the mattress?” It is whether the room and long-term plan benefit from another 17.5 inches of headboard height and the additional full-bed conversion path.

Three Como cribs, three clear jobs

Model Exterior size (L x D x H) Headboard Maker-listed path
Como Classic 55 x 30 x 34.5 in Low, open wood island-crib form Crib, toddler bed, daybed
Como with Horizontal Molding 55.25 x 30 x 52 in Tall wood panel with horizontal molding Crib, toddler bed, 54-inch bed, double-bed headboard
Como with Geometric Upholstered Panel 55.25 x 30 x 52 in Tall buttonless Boucle Beige panel Crib, toddler bed, 54-inch bed, double-bed headboard

Natart publishes the dimensions and configuration differences on its Como Classic page, horizontal-molding crib page and geometric-panel crib page. All three use an ash-wood structure and a wood mattress support with three adjustable heights.

Choose Como Classic for a lower sightline

The Como Classic Convertible Crib is 34.5 inches high, with slatted sides and no 52-inch panel defining one end of the room. That makes it the straightforward choice when the crib will be seen from several directions, when preserving sightlines across the room matters, or when the room benefits from a lower visual horizon.

Its length and depth are only a quarter-inch shorter and the same depth as the tall cribs, so Como Classic does not create a dramatically smaller floor plan. Its space advantage is vertical and visual. Tape a 55-by-30-inch rectangle for the crib either way; then use painter's tape on the wall at 34.5 inches and 52 inches. Stand at the doorway and at the chair to see what the tall headboard would cover.

The trade-off appears later. Natart describes Como Classic as converting to a toddler bed and daybed. It does not give this model the tall crib's 54-inch double-bed path. Choose Classic because that shorter path is enough, not because “convertible” sounds equivalent across all three products.

Choose horizontal molding for a wood headboard

The Como 4-in-1 with Horizontal Molding makes the 52-inch headboard a wood feature. It is the most direct choice when you want the tall profile but do not want an upholstered panel.

That difference has a practical care consequence. Natart's furniture-care instructions say to dust its furniture with a lint-free cloth, clean wood with a clean damp cotton cloth or rag following the grain, wipe spills promptly, and avoid commercial furniture polish that can create waxy buildup. Those instructions directly cover the wood surfaces; they should not be borrowed for fabric.

This is not a claim that wood is maintenance-free. Sunlight, moisture and heating or air-conditioning sources still affect placement and care. It is simply a clearer maintenance path when the household prefers to avoid a textile surface on the headboard.

Choose the geometric panel for the panel itself

The Como 4-in-1 with Geometric Upholstered Panel has the same published 55.25-by-30-inch footprint and 52-inch height as the horizontal-molding version. Natart identifies its panel as buttonless Boucle Beige upholstery. The geometric blocks create the strongest visual difference in the Como family.

Buy this version only if the upholstered panel is a feature you actively want. It does not make the mattress softer, change the recommended sleep surface, or create a safety advantage over the wood panel. It also introduces a textile-care question that Natart's general wood-care page does not answer. Obtain the panel's current care directions before using water, soap, stain remover or a machine on the fabric.

Light grey Como crib with a tall cream geometric upholstered headboard panel
The upholstered model changes the headboard material and appearance, not the crib's floor dimensions or safe-sleep requirements.

The conversion path changes the total room plan

The tall Como cribs are described as 4-in-1 because they can move beyond the toddler-bed stage to a 54-inch bed or a double-bed headboard. Natart lists separate components for that route: a toddler gate, low-profile footboard and double-bed conversion rails. Treat those as separate model-specific decisions unless the exact order confirmation says otherwise.

The future bed is much longer than the crib. Natart lists the double-bed conversion rails at 75 inches long, before the headboard and footboard complete the frame. A room that easily accepts a 55.25-inch crib may not accept the later bed on the same wall. Before paying for a conversion path, tape the future bed length and verify door, closet and dresser access again.

This is where Como Classic can be the better value for a household that expects to move to a separate bed later. Conversely, the tall 4-in-1 can make sense when keeping the same headboard and collection through the 54-inch-bed stage is a real plan rather than a distant possibility.

Use the crib safely in every style

The panel choice does not change the safe-sleep basics. Health Canada says the crib should have a firm, flat mattress with a tightly fitted sheet and no gaps between the mattress and crib sides. The sleep space should stay free of pillows, bumper pads, quilts, toys, mattress toppers and positioners. Keep the crib away from window-covering cords and electrical cords.

Assemble the exact model according to its instructions and use the mattress support only in permitted positions. The product pages list three mattress-support heights; the exact assembly instructions govern how those positions are used. Do not hang fabric, lighting, art or storage from the tall headboard, and do not place decorative cushions in the crib to echo an upholstered panel.

A room test that settles the choice

  1. Mark a 55.25-by-30-inch crib footprint on the floor; that covers all three options with a small allowance for Classic's quarter-inch difference.
  2. Mark 34.5 inches and 52 inches on the intended wall. View both lines from the door, chair and hallway.
  3. Decide whether the crib needs a future 54-inch-bed path. If yes, mark the longer future frame and identify the exact separate parts.
  4. Choose wood molding or Boucle upholstery based on the material you want to maintain, not on a safety or comfort claim.

Choose Como Classic for the lower, open crib form and a toddler/daybed future. Choose Horizontal Molding for a tall all-wood headboard and the full-bed path. Choose the Geometric Upholstered Panel when the Boucle panel is the design feature that justifies an additional textile surface to care for.

All three can fit almost the same floor rectangle. The right Como is the one whose headboard height, material and later configuration still make sense after the room is drawn at full scale.

Leave a comment

Please note, comments need to be approved before they are published.