Iloom Cusino 1500W Bed Guard / Q-Size Footboard – Two-Tone Ivory

One HB7215G-A4810 1500-class padded guard/footboard panel. The bed frame, headboard, mattress, adjacent guards, other-width footboards, steps, bedding and room furnishings are separate.

The maker lists its Cusino S, SS, Q and K frame configurations. These manufacturer codes do not establish universal fit with ordinary North American frames or mattresses. Check the actual Cusino mounting arrangement.

Yes, but the exact 1500 guard specification limits footboard use to the manufacturer’s Q configuration. It is not a footboard for every frame size.

No. The manufacturer specifically distinguishes its ordinary guard and footboard parts, including two different 1000-width panels. Only the 1500-width guard/footboard is expressly interchangeable; its Q-only footboard limitation still applies.

1527W × 60D × 812H mm. The 1500 name is a nominal width class. The 812 mm is overall panel height, not a stated protective height above any mattress or a maximum mattress thickness.

A4810 Two-Tone Ivory, with an ivory upper section and light-grey lower section. A481C on the material chart identifies that lower component; it is not a separate fourth finish or a different supplied panel. Other manufacturer colours in reference charts are not extra choices for this item.

The current manufacturer specification is a 12T MDF core, 25T double-sided foam padding and PVC faux-leather upholstery.

iloom says plastic mounting-bracket covers were added for manufacturer purchases from January 13, 2025, to reduce exposed metal with low mattresses. The dated update does not identify the fittings on an existing older bed or promise a particular hardware count. Check the actual version when matching parts.

When one Cusino bed is used on its own, the manufacturer says guards on both sides may pinch the mattress. It recommends placing the bed against a wall and fitting a guard only at the entry side. This condition concerns a bed used on its own, not only the manufacturer’s S size.

Measure the whole chosen bed configuration and leave at least 200 mm additional installation floor space beyond its product size. Each added guard occupies about 60 mm more space. The 200 mm is not a gap between the mattress and guard, and the family guide’s bed-layout dimensions are not this panel’s dimensions.

Use a brush-equipped vacuum and gentle soft-dry-cloth care. Immediately blot spilled liquid with a clean dry cloth without rubbing. Avoid kitchen detergent or other neutral soaps, heat, direct sunlight and prolonged dampness. Sweat, salts, organic matter and pet claws or teeth can damage the cover.

No. E0 is the manufacturer’s stated wood-material grade, with its guide describing formaldehyde emissions of 0.5 mg/L or less. It does not mean formaldehyde-free, clinical benefits or whole-product Canadian approval.

The manufacturer does not publish a positive age recommendation or maximum load for this panel. It is a model-specific furniture component, not a complete bed or crib. No age, loading limit or universal mattress fit should be inferred from lifestyle pictures.