
Turn toward easier buckling
Turn the seat toward the vehicle door to make loading and buckling easier. Before driving, lock it into the approved rear-facing or forward-facing position and confirm the green seat-lock indicator.
Get a 10% discount buying these products together
Evenflo Gold Revolve360 Slim 2-In-1 Rotational Car Seat With Sensorsafe
The Evenflo Gold Revolve360 Slim combines a streamlined seat with one-hand rotation for everyday loading and buckling. Two harness modes support rear-facing use up to 50 lb and forward-facing use up to 65 lb, while SensorSafe adds connected alerts. Choose the mode only when your child meets every age, height, weight and fit requirement.
| Modes | Rear-facing harness; forward-facing harness. No booster mode. |
|---|---|
| Rear-facing | 4–50 lb (1.8–22.6 kg); 17–48 in. (43–122 cm). Top of head at least 1 in. (2.5 cm) below the top of the headrest or shell; straps at or just below shoulders. |
| Forward-facing | 30–65 lb (13.6–29.4 kg); 35–49 in. (89–124 cm); at least 2 years old. Ears at or below the top of the headrest; straps at or just above shoulders. |
| Recline | Use the approved bubble-indicator zone when rear-facing. Forward-facing use requires the upright position. |
| Obsidian Black dimensions | 16.9 W × 20.8 D × 24.3 H in. (42.93 × 52.83 × 61.72 cm) |
| Quartz dimensions | 16.9 W × 21 D × 24.3 H in. (42.93 × 53.34 × 61.72 cm) |
| Colours and models | Obsidian Black — CS260112450C; Quartz — CS260112545C |
| Quartz fabric | Green & Gentle fabric, made without added chemicals or flame retardants |
| Product weight | 28.2 lb (approximately 12.8 kg) |
| SensorSafe | Included |
| Harness | Five-point, no-rethread harness |
| Service life | 10-year expiry period; check your seat’s manufacture/expiry information and follow all replacement instructions. |
Use rear-facing or forward-facing with the internal harness. Forward-facing requires 30–65 lb, 35–49 in. and at least 2 years of age. This Slim 2-in-1 does not convert to a booster.
Both Obsidian Black and Quartz measure 16.9 in. wide. Check the available seating position and rotation clearance in your own vehicle; a narrow seat does not guarantee three-across fit.
Rear-facing use supports 4–50 lb and 17–48 in. tall, with at least 1 in. of head clearance below the top of the headrest or shell. All fit conditions must be met. Stop using the mode as soon as any limit is exceeded.
Your child must be at least 2 years old, weigh 30–65 lb and measure 35–49 in., with the ears at or below the top of the headrest. The seat must be in its upright position and the harness at or just above the shoulders.
Bluetooth-connected SensorSafe can alert you to an unexpectedly unbuckled chest clip, unsafe ambient temperature, a child left unattended and a child buckled too long. It supplements caregiver checks and supervision.
The base is designed to stay installed between rear-facing and forward-facing harness modes. Confirm that the installation method remains permitted for your child’s weight and follow both the seat and vehicle manuals.
Turn the seat toward the vehicle door to make loading and buckling easier. Before driving, lock it into the approved rear-facing or forward-facing position and confirm the green seat-lock indicator. Never drive with the seat turned sideways.
Use the correct rear-facing recline-indicator zone for your child. The Canadian manual requires the upright position for forward-facing travel; do not carry the rear-facing recline setting into forward-facing use.
Yes. Follow the removal instructions, remove the headrest-pad foam inserts and cover the hook-and-loop fasteners before washing. Wash soft goods separately in cold water on a delicate cycle without chlorine bleach. Tumble dry 10–15 minutes on low and remove promptly. Wipe harness straps clean and air-dry; do not machine wash them.
No. The Slim is a convertible car seat used with its base in the vehicle, not a stroller-compatible infant carrier. Follow the manual whenever removing the seat from the base.
Before travel: Check the seat’s labels, installation, locked travel position and child fit. Follow the Canadian manual and your vehicle instructions.
Soft goods: Remove the headrest-pad foam inserts and cover hook-and-loop fasteners as directed. Machine wash separately in cold water on a delicate cycle without chlorine bleach. Tumble dry 10–15 minutes on low and remove immediately.
Harness, plastic and metal: Wipe with mild soap and water. Air-dry the harness; dry plastic and metal with a soft cloth. Avoid abrasive cleaners, solvents and lubricants. Do not immerse parts unless the manual specifically permits rinsing.
Why shop anywhere else?
baby enRoute will match our Canadian competitors on regular and sale priced items! To be eligible, please click "chat" or send a quick email to discuss with our staff.
Collect points as your little one grows. Earn 1 point per $1 spent on all regular-priced items.
On regular-priced items.
Your first little thank-you.
Best value. Even more to enjoy.